Winterizing and Shrink Wrapping
Protect Your Boat Throughout Winter
Winterizing your boat with Danversport Marina ensures top-notch care and protection during the off-season. Our experienced Service Technicians provide comprehensive winterization services for your boat to prevent damage from freezing temperatures. We safeguard your boat’s motor and systems, ensuring that your vessel is ready for a spring commissioning and the next boating season. Trust Danversport Marina to keep your boat in peak condition, offering peace of mind and removing winterization from your to-do list.
Winterizing Details
- Protect your boat with Danversport's shrink wrapping service. Our guarantee of materials and installation ensures your boat stays covered throughout the entire winter season. In the spring we remove the shrink wrap for you and dispose of it through eco-friendly recycling.
- Run, flush and fill engine(s) with non-toxic antifreeze
- Fog carbureted engines and run fuel injected models on remote tank with winter fuel mixture.
- Change engine oil and oil filter
- Check engine fluid levels
- Change spin-on water separating fuel filter and/or Racor filters and stabilize fuel in tank
- Change sterndrive gear oil and lube accessible grease points
- Remove sterndrive propeller, grease propeller shaft and re-install
- Inspect propeller and running gear for visible damage
- Inspect engine for signs of damage, leaks or component fatigue
- Run, flush and fog
- Change engine oil and filter
- Check unit fluid levels
- Fill unit with non-toxic antifreeze
- Visual inspection and provision of service recommendations as needed
- Run, flush and fog carbureted models, run fuel injected models on remote tank with winter fuel mixture.
- Replace spin on water separating filter and low pressure in-line fuel filter
- Change lower unit gear lube
- Remove propeller, grease propeller shaft and re-install
- Visual inspection and provision of service recommendations as needed
- Run, flush and fog carbureted models, run fuel injected models on remote tank with winter fuel mixture.
- Change engine oil and oil filter
- Replace spin on water separating filter and low pressure in-line fuel filter
- Change lower unit gear lube
- Remove propeller, grease propeller shaft and re-install
- Visual inspection and provision of service recommendations as needed
- Fresh Water Tanks, Water Pumps and Lines
- Marine Heads (holding tanks should be emptied prior to service)
- Air Conditioning Pumps and Lines
- Hot Water Heaters (bypass and drain)
- Ice Makers
- Washing Machines
- Engine Tune-Ups including, but not limited to, water pumps, thermostats, spark plugs, cap and rotor, belts
- Replacement of Internal and External Zinc Anodes
- Transmission Oil and Oil Filter Change
- Sterndrive Removal
- Propeller Reconditioning
- Lube Outboard Mechanical Steering Arm/Tube
- Hydraulic Steering Purge and Fill
- Remove Bracket Mounted Electronics for Pick Up
- Boat Preparations for Over the Road Transport